alignement-du-rail-porte-garage-montreal-laval
By Tim Green Garage Door Repair 0 Comments

7 Signs It’s Time to Repair Your Garage Door

As a vigilant homeowner, it's important to watch for signs indicating it's time to repair your garage door. Ignoring these signs can lead to complete door failure and potential safety hazards. Here are seven key indicators that your garage door needs professional attention:

  1. Excessive Nois

If your garage door makes loud grinding, squeaking, or knocking noises when it opens or closes, it signals a potential problem. Such noises should not be ignored, as they can indicate serious underlying issues. Contact a professional garage door repair service to diagnose and fix the problem before it worsens.

  1. Imbalance

Over time, the springs that assist in opening and closing your garage door can wear out, causing the door to become imbalanced. This imbalance can lead to shaking or uneven movement when operating the door. If your garage door starts to fall or appears misaligned, it's crucial to address the spring issues immediately to avoid safety risks.

  1. Incomplete Opening or Closing

If your garage door opens all the way but doesn't close completely, it may indicate a balance problem. This issue can be particularly dangerous if you have pets or small children. An imbalanced door can suddenly fall, causing potential injuries. Get it repaired promptly to prevent accidents.

  1. Slow Response Time

A garage door should respond to commands within a second or two after pressing the button. If there is a noticeable delay in opening or closing, it could mean there is an issue with the door or the opener. Slow response times require professional assessment and repair.

Île Bizard portes de garage montreal

  1. Dents and Damage

Dents in the garage door tracks can cause operational issues. If your door starts to close and then reverses, it could indicate a problem with the track alignment. Inspect the small wheels on your door to ensure they move smoothly. If you notice any issues, it's time to call a professional for repairs.

  1. Wear and Tear on Springs

Garage door springs typically last about 10,000 cycles. Regular wear and tear can shorten this lifespan, especially if the door is used frequently. Rust can also accumulate on the springs, increasing friction and leading to premature failure. Regularly lubricate the springs and check for balance to extend their life.

  • How to Check Garage Door Balance:

    1. Pull the emergency release cord (with the red handle) to put the door in manual mode.
    2. Raise the garage door halfway and release it. If the door stays in place, the springs are in good condition. If the door drops, the springs are wearing out and need immediate attention.

  1. Incorrect Springs

Using incorrect spring sizes or types can lead to premature failure. A properly balanced garage door should have two torsion springs, one on each side, to evenly distribute the weight. Some installers use a single long spring, which is not suitable for medium to large doors. Always ensure the correct springs are used to avoid serious damage.

Conclusion

Ignoring these signs can lead to major issues and potential safety hazards. Regular maintenance and timely repairs can ensure your garage door operates smoothly and safely. For complex repairs, such as spring replacements or track realignment, always hire professional technicians who have the necessary training and tools to perform the job safely and effectively.

Problèmes courants de réparation de porte de garage Montreal
By Tim Green Garage Door Repair 0 Comments

Why Won’t My Garage Door Close?

Garage doors are a vital part of our daily routine, but we often take them for granted until something goes wrong. A garage door that won't close can be more than just an inconvenience; it can pose a significant safety risk. Addressing the issue promptly and correctly is essential. Let's explore the common reasons why your garage door might not close and what steps you can take to fix it.

Common Reasons for a Garage Door Not Closing

  1. Obstructions or Misaligned Sensors

    • Objects Blocking the Track: Check if anything is obstructing the garage door track or sensors. Even small items can prevent the door from closing properly.
    • Misaligned Sensors: The safety sensors located on either side of the door near the ground send an invisible beam to each other. If these sensors are misaligned, the door won't close for safety reasons. Adjusting the sensors so they face each other can often resolve the issue.

  2. Damaged or Misaligned Tracks

    • Inspect the tracks for any bends, dents, or obstructions. Misaligned or damaged tracks can hinder the door's operation. This issue typically requires professional repair.

  3. Faulty or Improperly Adjusted Opener

    • The garage door opener may need adjustments or repairs. If the opener is not functioning correctly, it can prevent the door from closing. This often requires the expertise of a trained technician.

  4. Tangled or Damaged Elevator Cable

    • The elevator cable, which helps lift the door, can become tangled or damaged. Do not attempt to repair this yourself, as the cables are under high tension and can cause serious injury. A professional technician should handle this repair.

  5. Electronic Eye Sensor Issues

    • The electronic eye, a safety feature, can sometimes prevent the door from closing. Ensure that the sensors are clean and aligned. If the receiving sensor doesn't detect the beam from the transmitting sensor, the door won't close.
Garage Door Repair Rosemère

Troubleshooting Steps

Step 1: Look Around for Obstructions

Inspect the area around the garage door for any obstructions. Ensure that the tracks and sensors are clear of debris and that the cables are neatly wound around the drum.

Step 2: Check the Door Sensors

Ensure the garage door sensors are clean and aligned. If they are misaligned, adjust them so they face each other directly. Misaligned sensors are a common cause of garage door issues and can often be fixed with a simple adjustment.

Step 3: Use the Garage Door Wall Control

Try using the wall control to close the door. If the door closes with the wall control but not with the remote, the issue might be with the remote. Replacing the remote's battery might solve the problem. If not, the remote may need to be replaced.

Step 4: Close the Door Manually

If your garage door still won't close, you can try closing it manually:

  1. Pull the red emergency release cord to disconnect the door from the opener and switch to manual mode.
  2. Carefully lower the door by grasping the bottom and gently pulling it down.

Step 5: Call a Professional Technician

If you've tried the above steps and the door still won't close, it's time to call a professional garage door repair technician. Issues like tangled cables, damaged tracks, or faulty openers require professional attention to avoid further damage or injury.

A garage door that won't close can be a significant inconvenience and a safety hazard. By identifying and addressing the issue promptly, you can ensure your garage door operates smoothly and safely. Remember, if you're unsure about handling any repairs yourself, it's always best to seek professional help.